AND FONT SIZE
The term “font” refers to the general shape of a character. The default font in Microsoft Word 2010 is Calibri. Font sizes are measured in points; 1 point (abbreviated pt) is equal to 1/72 of an inch. The point size refers to the height of a character. Thus, a 12-pt font is 1/6 inch in height.Set the
margin unit of measurement to inches,
centimeters, millimeters, points, or picas.
Change units used for margin measurement
- Go to File > Options > Advanced. Scroll down to Display.
- Select the unit you want in Show measurements in units of.
- Select OK.
The term “font” refers to the general shape of a character. Font sizes are measured in points; 1 point (abbreviated pt) is equal to 1/72 of an inch. The point size refers to the height of a character. Thus, a 12-pt font is 1/6 inch in height. The default font size in Microsoft Word 2010 is 11 pts.
| Letter Height | Font Size Equivalent | Best Legibility |
|---|
| 1” | 72 pt. | 1' |
| 1.5” | 105 pt. | 15' |
| 2” | 144 pt. | 20' |
| 3” | 216 pt. | 30' |
Changing Measurement Units
- Display the Word Options dialog box.
- Click Advanced at the left side of the dialog box.
- Scroll through the available options until you see the Display section.
- Using the Show Measurements in Units Of drop-down list, select the units of measurement you want used by default.
- Click on OK.
AND FONT SIZE
Font sizes are measured in points; 1 point (abbreviated pt) is equal to 1/72 of an inch. The point size refers to the height of a character. Thus, a 12-pt font is 1/6 inch in height. The default font size in Microsoft Word 2010 is 11 pts.Set the
margin unit of measurement to inches, centimeters,
millimeters, points, or picas.
Change units used for margin measurement
- Go to File > Options > Advanced. Scroll down to Display.
- Select the unit you want in Show measurements in units of.
- Select OK.
The term “font” refers to the general shape of a character. The default font in Microsoft Word 2010 is Calibri. Font sizes are measured in points; 1 point (abbreviated pt) is equal to 1/72 of an inch. The point size refers to the height of a character. Thus, a 12-pt font is 1/6 inch in height.
You can change the settings in Apple's Pages word processing program to inches.
- Launch Pages.
- Click “Pages” in the menu bar and select “Preferences” from the menu.
- Click “Rulers.”
- Click “Ruler Units” and change the setting from centimeters (cm) to inches (in).
- Close the Preferences window.
Go to Layout > Margins, select Margins, and then select Custom Margins. In the Top, Bottom, Left, and Right boxes, set the margins that you want, and then select Default. When you are prompted, select Yes to change the default settings for document layout.
Working in Excel 2010's Page Layout View
- Click the File tab and then click Options. The Excel Options dialog box appears.
- Click the Advanced tab and then select the appropriate unit on the Ruler Units drop-down menu in the Display section. You can change the Ruler units setting to display Inches, Centimeters, or Millimeters.
- Click OK.
You can double-space all or part of a Word document. To double-space the whole document, go to Design > Paragraph Spacing, and choose Double. Tip: To double-space only part of the document, select the paragraphs you want to change, go to Home > Line and Paragraph Spacing, and choose 2.0.
The gutter margin is a typographical term used to designate an additional margin added to a page layout to compensate for the part of the paper made unusable by the binding process. In a facing pages layout (Word refers to this type of layout as "mirror margins"), the gutter margin is on the very inside of both pages.
Point (or pt for short) is a unit of measure. Points are common units of measure for: Thickness of a stock. Line-weight.
pt inches Convertion table
| Pica Point | Inches |
|---|
| 1 pt | 0.013834867007874 inches |
| 2 pt | 0.027669734015748 inches |
| 3 pt | 0.041504601023622 inches |
| 4 pt | 0.055339468031496 inches |
You can also use Keynote to create an electronic PDF-format document instead of a printed handout, which your audience members can download from your Web site. To print a hard copy of your slides and notes, follow these steps: Within Keynote, click File and choose Print.
Picas are designated with the letter p, such as 16p. For instance, the standard width for one column of text on a three-column grid on an 8.5" x 11" document is 14 picas and 4 points, or 14p4.
Select a new file with whatever screen-size you want. Next, click on the Document icon (at far left) in the Inspector. On the Document tab, select Custom slide size from the Slide Size drop-down. Enter whatever size poster you want, in pixels.
Set text margins
- Select the text whose margins you want to modify.
- Do any of the following: In the ruler, drag the margin marker (the blue triangle) and the first line indent marker (the blue rectangle) to where you want it. If you don't see rulers, click. in the toolbar, then choose Show Rulers.
Choose File > Print (from the File menu at the top of your screen). Specify the number of copies and whether you want to print one page or all pages. In the pop-up menu below the page selection controls, choose Keynote. If you don't see the pop-up menu, click Show Details at the bottom of the print dialog.
Change the slide size
- Click the Document button , then click the Document tab.
- Choose a slide size from the Slide Size pop-up menu.
- If you chose Custom Slide Size, enter the slide dimensions, then click OK.
1 cm = 37.795280352161 PX. 4 x 37.795280352161 PX = 151.18112140865 Pixels.
4x6 is a standard size, but not all photos are standard size. A 4x6 photo might have 400x600 pixels or 800x1200 pixels, or any other number of pixels having a 2 by 3 ratio.
Centimeters to Pixels Conversion Table
| Centimeters | Pixels |
|---|
| 2cm | 75.6px |
| 2.5cm | 94.5px |
| 3cm | 113.39px |
| 3.5cm | 132.28px |
Answer: 3.5cm x 4.5cm at 100 dpi is equivalent to 138 x 177 pixels. Hence, the dimensions in pixels will be 1.38*100 x 1.77*100 pixels i.e. 138 x 177 pixels.
The 2.5 cm equals 2.5 x 2.54 = 6.35 inches. Next multiply the dimensions in inches by the pixels per inch. The 8.89 inches x 200 dpi = 1778 pixels. The 6.35 inches x 200 dpi = 1270 pixels.
So there are 96
pixels per 2.54
cm.
Centimeters to Pixels Conversion Table for Various Resolutions.
| Pixel Density | Pixels |
|---|
| 4 dpi | 1.57480315 px |
| 5 dpi | 1.968503937 px |
| 6 dpi | 2.362204724 px |
| 7 dpi | 2.755905512 px |
Count your pixels
Lo-res images have around 72-pixels, or squares of color, per inch. This makes them great for the web, because that's all your computer screen will display, anyhow. Plus, they are very lightweight (fewer pixels), so they help websites load quickly. Hi-res images are at least 300 pixels per inch (ppi).
