The Best Ski Wax Alternatives
- Look No Wax.
- Phantom Permanent Waxless Glide.
- Faststik Revolutionary Ski Wax Alternative.
Generally, you want to hot wax your board every 3 to 4 days of riding. This ensures better glide in varying snow conditions and an overall better performance. Just make sure you're using the right type of wax for the specific conditions.
No, you should never use candle wax on a snowboard. You should only ever use wax sold specifically for waxing a snowboard or skis. Using candle wax can actually ruin your board and make it go slower on the slopes.
As long as your board is stored dry, well supported and waxed, it can last for over 10 years in storage without deteriorating too much. Most riders store their boards for about 6 months in between seasons each year.
Snowboard Tuning
| Services for Snowboards | Price |
|---|
| Sharpen, Wax & Glide | $55 |
| Debur & Wax | $30 |
| Hot Wax | $20 |
| Wax | $10 |
Yes, you can use a traditional clothes iron to wax skis or a snowboard, but there are some things to be aware of. Regular household irons fluctuate in temperature more widely than wax-specific irons and can easily be set at too hot a temperature, causing you to damage your bases.
The quick answer is that you should get your snowboard waxed before using it. It does come with a wax and tune from the factory so you won't hurt it by riding on it right away.
Our boards come waxed and ready to ride out of the box. But, you are welcome to tune or de-tune them to your individual snow conditions or preferences. It's always a good idea to wax your board after a few days of riding. Remember, speed is your friend.
It is possible to break a snowboard. Landing very hard on the tail and awkward landings with large amounts of force can also result in the snowboard breaking or snapping. Extreme over flexing of the snowboard will also cause it to snap.
Just like skis, a snowboard should be tuned about every 20 snowboarding sessions. You will notice when your snowboard needs to be tuned when the edges start to look chipped and worn out.
How do you know when your snowboard edges need to be sharpened? If your edge feels blunt or 'burred' when you rub it gently with your thumb then it might be time for you to get your edges sharpened. This is usually the test to see if it's time for a sharpen.
In short: No. Snowboard bindings must match with the corresponding boot sizes. Some bindings even require specific boots to ride. Aside from that, most combinations of snowboard boots and bindings will work together.
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.
Wax your snowboard with a waxing iron.Although regular waxing during the winter is important too, be sure to also apply a thick layer of wax on your snowboard in the summer to preserve it during the off-season. Just be sure to remove the wax before the next time you go snowboarding.
With all the necessary equipment it should take around 20-25 minutes to wax a board. Regular waxes keep your board running fast while providing a protective layer for your base.
Car wax is too slippery, you'll go way too fast with car wax. Stick with the stuff that they make for the snowboards.
Use a splash of citrus-based cleaner like One Ball Jay Base Cleaner or Goo Gone, a rag, and some elbow grease to scrub the base clean. Wipe it dry and let it sit for about twenty minutes. This step is the most crucial come springtime, when there are a lot of contaminants in the snow that can stick to your base.
The only thing that gets dry is the wax, the base will be perfectly fine. Think about it this way, if you were to go buy a 2013 board today do you think the shop waxed it every few months to make sure the base didn't get damaged.
Is there a point when you should replace a snowboard? Yep, replace it when it breaks, has huge unfixable holes in the base or it has some huge fault such as the entire top sheet coming off. Outside of that, there's no reason you NEED to replace your snowboard as long as it's working fine for your current riding style.
- Step 1: Preparing Binding for Storage.
- Step 2: Tune Edges to Prevent Rust. Inspect the edges of your skis or snowboard looking for any rust, or burrs.
- Step 3: Clean Your Ski or Snowboard Base.
- Step 4: Protect Your Base with a Thick Layer of Wax. Next, apply a thick coat of wax.
- Step 5: Find the Perfect Storage Spot.
