How Do I Get Internet Service Without Any Phone Jacks?
- Sign up for Internet service with your cable company. They will offer installation, or you can set it up yourself.
- Purchase a cable modem or use the one your cable company provides.
- Locate the coaxial outport on the back of your cable box.
- Coaxial Cable.
- The Ethernet wire and port.
- Power everything on.
No, you do not need an active phone line to get an internet service on the nbn™. Unlike ADSL, the nbn™ does not require you to have an active landline. Most ADSL customers only have a phone line so they can have an internet connection.
Best Ways to Get Internet Without Cable
- FreedomPop. FreedomPop provides wireless Internet for users via a hotspot.
- Boost Mobile. Boost Mobile provides internet courtesy of a mobile Wi-Fi hotspot too.
- Google Fiber.
- Frontier Communications.
- Verizon Fios.
- AT&T.
- Xfinity by Comcast.
- Century Link.
One of the easiest ways to establish phone connectivity is by converting an electrical outlet to a landline. There are wireless telephone jacks available that you simply plug into any electrical outlet and, voilá! You'll be able to connect up a corded or cordless phone.
Ethernet and telephone cables look fairly similar and it is not uncommon to get the two mixed up. The key difference between the two is the size of the plastic connectors on the ends of the cable. Telephones use an RJ11/RJ12 connector whereas Ethernet uses RJ45. RJ11/RJ12 only uses 4-6 pins whereas RJ45 uses 8 pins.
You don't need a phone line in order to get Internet service. In fact, most cable companies offer Internet service by hooking up the coaxial cable line to a special cable modem. DSL modems use phone lines to connect your network to the Internet, and the router connects to the modem, not the phone line.
Unplug the modular connector from its jack. Get a working phone and plug it into the jack. Lift the telephone handset and listen for a dial tone. The absence of a dial tone indicates that there is no power or signal coming from the phone company.
A: Cable and phone wires don't carry current, so it's safe to remove them. However, it's critical not to cut into a power line, as you know. Find it by doing a Web search for the words “Pepco equipment responsibility.” The wire to your house is Pepco's responsibility; past the weather head, it's yours.
It is true that the normal voltage in telephone wires, which provides the dial tone, is not dangerous. Not only could they cause a spark (while unlikely to actually cause a fire there is no sense it taking a risk that is so easily dealt with), if they short together, it could cause your phone to stop working.
Back at the phone jack that is not working, remove the cord from the phone jack and look inside the terminal. Check the wires that make contact with the phone cord and see if any look bent out of shape or damaged. If a wire looks bent or out of position, use needlenose pliers to try and bend it back into position.
However, for now, all you need to know is that your telephone, TV, Internet and other communication needs can all be handled by running only two types of cable—all headquartered in a central distribution system you can install yourself. Existing phone lines and jacks can coexist with your new system.
Just leave them alone if hooked up. It will not hurt anything. Now of course if it is one continuous run, where they stripped some of the insulation to place in the screw, cutting it will kill all downstream phone jacks. If you want to cut the lines, just cut them and push in the wall.
The overhead power line to your house is the the 120/240 Volts service drop and is insulated up to 600 volts. By just touching it, you will not electrocute yourself.
In other words, it takes very little power to operate a telephone. So even if the power goes out in your house, the phone still gets the power it needs through the phone line. And at the phone company office there is an extensive battery system, as well as a backup generator, to supply power during a power failure.
When the phone is not in use, this is a constant DC signal (about 50-60 volts). When the phone rings, the signal is a 20 hertz AC signal (about 90 volts). When in use it is a modulated DC signal (between 6 and 12 volts). The phones lines even have power during a blackout in most cases.
