Standard kitchen cabinet heights include 12, 15, 18, 30, 36 and 42 inches tall; depth ranges from 12 to 18 inches. Typically installed 18 inches above countertops, 54 inches above floor and 24 inches above stove.
There is no set rule, upper cabinets aren't made in any one specific height or width, even the depth can vary. It is true that generally upper cabinets tend to be shallower than lower ones. In fact lower cabinets are usually two feet deep, covered by a countertop that is longer only by an inch.
A standard base cabinet should be 24 inches or 61 cm in depth. Since refrigerator manufacturers now make deeper fridges, it directly creates a need for deeper countertops or cabinets. If your kitchen isn't too large, there are base cabinets as small as 12 inches in depth which can fit into tiny spaces in the kitchen.
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar.
Most of IKEA's wall cabinets are 15 inches deep. A few of IKEA's wall cabinets are 24 inches deep. These wall cabinets are typically mounted over refrigerators. A complete IKEA wall cabinet consists of the cabinet box, doors, hinges, and shelves.
Ideas for using that awkward space above the fridgeAdd rustic wood shelves. Remove cabinet doors and add beadboard. Store your mixer and pair it with a plant. Add a shallow shelf for pantry food jars.
Just put a simple trim piece, painted the color of the cabinets, to reduce the gap. Something like what is over or under your microwave next to the fridge. It's a very easy fix. You can still leave a small gap, plus the large gap behind the trim, for ventilation.
Gaps for VentilationYour fridge needs space around it for ventilation. Without proper ventilation, the compressor overheats. The gap around your fridge allows warm air to move away from the appliance.
Side Clearance – Plan for between one-half inch to one-inch of clearance on both sides of the unit. Rear Clearance – Allow between one to two inches of space at the rear of the refrigerator for proper airflow. Top Clearance – Ensure there is a minimum of one-half inch to one-inch of clearance on top of the unit.
“Counter-depth†refers to the distance between the front of your kitchen countertops and your back wall or backsplash. These refrigerators are usually 24–30-inches deep, shallower than most fridges, to line up with the end of your cabinets and fit in nicely with most modern kitchen designs.
To obtain the most integrated look, the cabinet or soffit above the refrigerator should extend out to the same depth as the side panels. The refrigerator opening must have minimum dimensions of 70" high x 36-1/8" wide x 24-1/2" deep as shown at right.
The cabinet above my fridge. It is so convenient to store items on top of the fridge, especially pitchers. Those pitchers are an arms reach away; the top of it is begging to be used.
However, the depth of the refrigerator box itself—measured without the doors—is often about 24 to 25 inches, which does match the depth of standard cabinetry and countertops. This means that you can expect the refrigerator doors to extend forward from the front lip of standard countertops.Dec 10, 2020
Depth: Measure from the wall to the front of your cabinets. This lets you know if the fridge will stick out beyond them, be level or sink in behind them. If your kitchen is narrow, you might want to measure the space across too, so you know if you'll have room for wide doors to open.Oct 3, 2011
Although the average size of a refrigerator varies depending on the type of fridge (bottom freezer, top freezer, French door or side-by-side), standard refrigerator dimensions range from 28 ¾ to 39 ¾ inches in width, 61 ¾ to 71 ¼ inches in height and 28 ¾ to 34 â… inches in depth.
Standard opening for refrigerator is usually 36†wide and standard size of the wall cabinet over refrigerator 36†in width as well. In some cases the cabinet has to be smaller or bigger depending on the fridge size. The heights will vary from 12†to 24†depending on the walls cabinets and how big the refrigerator is.
The average wall or upper kitchen cabinets are 30â€-42†in Height, 12â€-24†in Depth, and 9â€-36†in Width.
In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you'll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
